01-07-2025, 03:53 PM
Description:
![[Image: 77-e1693745667801.jpg.webp]](https://vibromera.eu/wp-content/uploads/2023/09/77-e1693745667801.jpg.webp)
Order on eBay
Overview of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Main Functions and Features
Vibrometry Mode
Tachometer: Accurate measurement of rotational speed (RPM).
Phase: Identifies the phase angle of vibration signals for accurate analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: In-depth analysis of the vibration frequency spectrum.
Overall Vibration: Monitors overall vibration levels.
Measurement Log: Stores measurements for subsequent review.
Balance Mode
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Balances rotors dynamically in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Enables continuation of the previous balancing session.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Graphs and Diagrams
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Represents vibration behavior at the main frequency.
Harmonic Graphs: Analyzes the presence and impact of harmonic frequencies.
Spectral Graphs: Visual representation of the frequency spectrum for thorough analysis.
Additional Capabilities
Archive: Save and access past balancing sessions.
Reports: Create comprehensive balancing reports.
Rebalancing: Allows easy rebalancing with archived data.
Serial Production Balancing: Suitable for balancing rotors in mass production settings.
Package Contents
The Balanset-1A package includes:
A measurement unit with interface connectivity.
Two accelerometers.
Optical sensor (laser tachometer) with magnetic mount.
Electronic balance scales.
Software (Note: Laptop not included, available as an additional order).
Protective transport case.
Main Advantages
The Balanset-1A is easy to use, economical, and versatile, providing solutions for a wide array of balancing and vibration analysis needs.
The device's efficiency and adaptability to specific tasks make it suitable for manufacturing and maintenance needs.
Price: US $1,999.
This versatile device meets the needs of small workshops and large enterprises, offering flexible, universal use.
Order on eBay
Order on eBay
Overview of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Main Functions and Features
Vibrometry Mode
Tachometer: Accurate measurement of rotational speed (RPM).
Phase: Identifies the phase angle of vibration signals for accurate analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: In-depth analysis of the vibration frequency spectrum.
Overall Vibration: Monitors overall vibration levels.
Measurement Log: Stores measurements for subsequent review.
Balance Mode
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Balances rotors dynamically in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Enables continuation of the previous balancing session.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Graphs and Diagrams
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Represents vibration behavior at the main frequency.
Harmonic Graphs: Analyzes the presence and impact of harmonic frequencies.
Spectral Graphs: Visual representation of the frequency spectrum for thorough analysis.
Additional Capabilities
Archive: Save and access past balancing sessions.
Reports: Create comprehensive balancing reports.
Rebalancing: Allows easy rebalancing with archived data.
Serial Production Balancing: Suitable for balancing rotors in mass production settings.
Package Contents
The Balanset-1A package includes:
A measurement unit with interface connectivity.
Two accelerometers.
Optical sensor (laser tachometer) with magnetic mount.
Electronic balance scales.
Software (Note: Laptop not included, available as an additional order).
Protective transport case.
Main Advantages
The Balanset-1A is easy to use, economical, and versatile, providing solutions for a wide array of balancing and vibration analysis needs.
The device's efficiency and adaptability to specific tasks make it suitable for manufacturing and maintenance needs.
Price: US $1,999.
This versatile device meets the needs of small workshops and large enterprises, offering flexible, universal use.
Order on eBay