03-04-2025, 02:28 AM
Description:
![[Image: 77-e1693745667801.jpg.webp]](https://vibromera.eu/wp-content/uploads/2023/09/77-e1693745667801.jpg.webp)
Order on Machinio
Or get a €100 discount on the official website vibromera.eu with promo code VB100
Balanset-1A Overview
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Key Features and Capabilities
Vibrometry Mode
Tachometer: Accurate RPM measurement.
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: Comprehensive analysis of the vibration frequency spectrum.
Overall Vibration: Tracks the overall vibration level.
Measurement Log: Stores measurements for subsequent review.
Balance Mode
Single-Plane Balancing: Corrects rotors in one plane to decrease vibration.
Two-Plane Balancing: Dynamic balancing of rotors in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Enables continuation of the previous balancing session.
Tolerance Calculator (ISO 1940): Computes allowable imbalance as per ISO 1940 standards.
Grinding Wheel Balancing: Corrects grinding wheel imbalance with three counterweights.
Graphs and Visualizations
Overall Graphs: Shows overall vibration levels.
1x Graphs: Displays vibration patterns at the main frequency.
Harmonic Graphs: Shows the influence of harmonic frequencies.
Spectral Graphs: Graphically shows the frequency spectrum for in-depth analysis.
Additional Capabilities
Archive: Store and revisit past balancing data.
Reports: Create thorough reports on balancing.
Rebalancing: Enables rebalancing using stored session data.
Serial Production Balancing: Suitable for balancing rotors in mass production settings.
Package Contents
The Balanset-1A package includes:
A measurement block with an interface.
Two vibration measurement sensors.
Optical laser tachometer with magnetic mount.
Software (laptop sold separately).
Electronic balance scales.
Transport case.
Price:
Full kit: €2251
OEM kit: €1978
Order on Machinio
Save €100 on vibromera.eu with promo code VB100!
Instagram: https://www.instagram.com/vibromera_ou/
Youtube: https://www.youtube.com/@vibromera
Website: vibromera.eu
Order on Machinio
Or get a €100 discount on the official website vibromera.eu with promo code VB100
Balanset-1A Overview
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Key Features and Capabilities
Vibrometry Mode
Tachometer: Accurate RPM measurement.
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: Comprehensive analysis of the vibration frequency spectrum.
Overall Vibration: Tracks the overall vibration level.
Measurement Log: Stores measurements for subsequent review.
Balance Mode
Single-Plane Balancing: Corrects rotors in one plane to decrease vibration.
Two-Plane Balancing: Dynamic balancing of rotors in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Enables continuation of the previous balancing session.
Tolerance Calculator (ISO 1940): Computes allowable imbalance as per ISO 1940 standards.
Grinding Wheel Balancing: Corrects grinding wheel imbalance with three counterweights.
Graphs and Visualizations
Overall Graphs: Shows overall vibration levels.
1x Graphs: Displays vibration patterns at the main frequency.
Harmonic Graphs: Shows the influence of harmonic frequencies.
Spectral Graphs: Graphically shows the frequency spectrum for in-depth analysis.
Additional Capabilities
Archive: Store and revisit past balancing data.
Reports: Create thorough reports on balancing.
Rebalancing: Enables rebalancing using stored session data.
Serial Production Balancing: Suitable for balancing rotors in mass production settings.
Package Contents
The Balanset-1A package includes:
A measurement block with an interface.
Two vibration measurement sensors.
Optical laser tachometer with magnetic mount.
Software (laptop sold separately).
Electronic balance scales.
Transport case.
Price:
Full kit: €2251
OEM kit: €1978
Order on Machinio
Save €100 on vibromera.eu with promo code VB100!
Instagram: https://www.instagram.com/vibromera_ou/
Youtube: https://www.youtube.com/@vibromera
Website: vibromera.eu